If you’re like most people, you probably use Excel to fill in data automatically. But there’s a better way to do it - with the Fill Handle. The Fill Handle is a special function in Excel that lets you fill in data automatically using your mouse. You just drag and drop the data into the cells that you want to use, and Excel will take care of the rest. Here’s how it works: first, Excel grabs all of the data that you’ve already filled out into cells A1 through A9 (the bottom row of cells in your spreadsheet). Next, it looks for any empty cells in that row or column - these are called “holes” in the data. If there are any, Excel fills them with whatever data you’ve dragged and dropped into those cells. If there aren’t any holes, then Excel starts filling in the data automatically from the next row or column over (depending on how many rows or columns there are after your original row or column). It’ll also fill in any gaps between adjacent rows or columns if they’re present. Once everything’s filled in, Excel updates the sheet so that it looks like your original spreadsheet - complete with all of your data! And if you ever want to go back and change anything - no problem! Just delete all of the old data and start fresh with the Fill Handle again!

The Fill Handle in Excel allows you to automatically fill in a list of data (numbers or text) in a row or column simply by dragging the handle. This can save you a lot of time when entering sequential data in large worksheets and make you more productive.

Instead of manually entering numbers, times, or even days of the week over and over again, you can use the AutoFill features (the fill handle or the Fill command on the ribbon) to fill cells if your data follows a pattern or is based on data in other cells. We’ll show you how to fill various types of series of data using the AutoFill features.

Fill a Linear Series into Adjacent Cells

One way to use the fill handle is to enter a series of linear data into a row or column of adjacent cells. A linear series consists of numbers where the next number is obtained by adding a “step value” to the number before it. The simplest example of a linear series is 1, 2, 3, 4, 5. However, a linear series can also be a series of decimal numbers (1.5, 2.5, 3.5…), decreasing numbers by two (100, 98, 96…), or even negative numbers (-1, -2, -3). In each linear series, you add (or subtract) the same step value.

Let’s say we want to create a column of sequential numbers, increasing by one in each cell. You can type the first number, press Enter to get to the next row in that column, and enter the next number, and so on. Very tedious and time consuming, especially for large amounts of data. We’ll save ourselves some time (and boredom) by using the fill handle to populate the column with the linear series of numbers. To do this, type a 1 in the first cell in the column and then select that cell. Notice the green square in the lower-right corner of the selected cell? That’s the fill handle.

When you move your mouse over the fill handle, it turns into a black plus sign, as shown below.

With the black plus sign over the fill handle, click and drag the handle down the column (or right across the row) until you reach the number of cells you want to fill.

When you release the mouse button, you’ll notice that the value has been copied into the cells over which you dragged the fill handle.

Why didn’t it fill the linear series (1, 2, 3, 4, 5 in our example)? By default, when you enter one number and then use the fill handle, that number is copied to the adjacent cells, not incremented.

NOTE: To quickly copy the contents of a cell above the currently selected cell, press Ctrl+D, or to copy the contents of a cell to the left of a selected cell, press Ctrl+R. Be warned that copying data from an adjacent cell replaces any data that is currently in the selected cell.

To replace the copies with the linear series, click the “Auto Fill Options” button that displays when you’re done dragging the fill handle.

The first option, Copy Cells, is the default. That’s why we ended up with five 1s and not the linear series of 1–5. To fill the linear series, we select “Fill Series” from the popup menu.

The other four 1s are replaced with 2–5 and our linear series is filled.

You can, however, do this without having to select Fill Series from the Auto Fill Options menu. Instead of entering just one number, enter the first two numbers in the first two cells. Then, select those two cells and drag the fill handle until you’ve selected all the cells you want to fill.

Because you’ve given it two pieces of data, it will know the step value you want to use, and fill the remaining cells accordingly.

You can also click and drag the fill handle with the right mouse button instead of the left. You still have to select “Fill Series” from a popup menu, but that menu automatically displays when you stop dragging and release the right mouse button, so this can be a handy shortcut.

Fill a Linear Series into Adjacent Cells Using the Fill Command

If you’re having trouble using the fill handle, or you just prefer using commands on the ribbon, you can use the Fill command on the Home tab to fill a series into adjacent cells. The Fill command is also useful if you’re filling a large number of cells, as you’ll see in a bit.

To use the Fill command on the ribbon, enter the first value in a cell and select that cell and all the adjacent cells you want to fill (either down or up the column or to the left or right across the row). Then, click the “Fill” button in the Editing section of the Home tab.

Select “Series” from the drop-down menu.

On the Series dialog box, select whether you want the Series in Rows or Columns. In the Type box, select “Linear” for now. We will discuss the Growth and Date options later, and the AutoFill option simply copies the value to the other selected cells. Enter the “Step value”, or the increment for the linear series. For our example, we’re incrementing the numbers in our series by 1. Click “OK”.

The linear series is filled in the selected cells.

If you have a really long column or row you want to fill with a linear series, you can use the Stop value on the Series dialog box. To do this, enter the first value in the first cell you want to use for the series in the row or column, and click “Fill” on the Home tab again. In addition to the options we discussed above, enter the value into the “Stop value” box that you want as the last value in the series. Then, click “OK”.

In the following example, we put a 1 in the first cell of the first column and the numbers 2 through 20 will be entered automatically into the next 19 cells.

Fill a Linear Series While Skipping Rows

To make a full worksheet more readable, we sometimes skip rows, putting blank rows in between the rows of data. Even though there are blank rows, you can still use the fill handle to fill a linear series with blank rows.

To skip a row when filling a linear series, enter the first number in the first cell and then select that cell and one adjacent cell (for example, the next cell down in the column).

Then, drag the fill handle down (or across) until you fill the desired number of cells.

When you’re finished dragging the fill handle, you will see your linear series fills every other row.

If you want to skip more than one row, simply select the cell containing the first value and then select the number of rows you want to skip right after that cell. Then, drag the fill handle over the cells you want to fill.

You can also skip columns when you are filling across rows.

Fill Formulas into Adjacent Cells

You can also use the fill handle to propagate formulas to adjacent cells. Simply select the cell containing the formula you want to fill into adjacent cells and drag the fill handle down the cells in the column or across the cells in the row that you want to fill. The formula is copied to the other cells. If you used relative cell references, they will change accordingly to refer to the cells in their respective rows (or columns).

RELATED: Why Do You Need Formulas and Functions?

You can also fill formulas using the Fill command on the ribbon. Simply select the cell containing the formula and the cells you want to fill with that formula. Then, click “Fill” in the Editing section of the Home tab and select Down, Right, Up, or Left, depending on which direction you want to fill the cells.

RELATED: How to Manually Calculate Only the Active Worksheet in Excel

NOTE: The copied formulas will not recalculate, unless you have automatic workbook calculation enabled.

You can also use the keyboard shortcuts Ctrl+D and Ctrl+R, as discussed earlier, to copy formulas to adjacent cells.

Fill a Linear Series by Double Clicking on the Fill Handle

You can quickly fill a linear series of data into a column by double clicking the fill handle. When using this method, Excel only fills the cells in the column based on the longest adjacent column of data on your worksheet. An adjacent column in this context is any column that Excel encounters to the right or left of the column being filled, until a blank column is reached. If the columns directly on either side of the selected column are blank, you cannot use the double click method to fill the cells in the column. Also, by default, if some of the cells in the range of cells you’re filling already have data, only the empty cells above the first cell containing data are filled. For example, in the image below, there’s a value in cell G7 so when you double click on the fill handle on cell G2, the formula is only copied down through cell G6.

Fill a Growth Series (Geometric Pattern)

Up until now, we’ve been discussing filling linear series, where each number in the series is calculated by adding the step value to the previous number. In a growth series, or geometric pattern, the next number is calculated by multiplying the previous number by the step value.

There are two ways to fill a growth series, by entering the first two numbers and by entering the first number and the step value.

Method One: Enter the First Two Numbers in the Growth Series

To fill a growth series using the first two numbers, enter the two numbers into the first two cells of the row or column you want to fill. Right-click and drag the fill handle over as many cells as you want to fill. When you’re finished dragging the fill handle over the cells you want to fill, select “Growth Trend” from the popup menu that automatically displays.

NOTE: For this method, you must enter two numbers. If you don’t, the Growth Trend option will be grayed out.

Excel knows that the step value is 2 from the two numbers we entered in the first two cells. So, every subsequent number is calculated by multiplying the previous number by 2.

What if you want to start at a number other than 1 using this method? For example, if you wanted to start the above series at 2, you would enter 2 and 4 (because 2×2=4) in the first two cells. Excel would figure out that the step value is 2 and continue the growth series from 4 multiplying each subsequent number by 2 to get the next one in line.

Method Two: Enter the First Number in the Growth Series and Specify the Step Value

To fill a growth series based on one number and a step value, enter the first number (it doesn’t have to be 1) in the first cell and drag the fill handle over the cells you want to fill. Then, select “Series” from the popup menu that automatically displays.

On the Series dialog box, select whether your filling the Series in Rows or Columns. Under Type, select :”Growth”. In the “Step value” box, enter the value you want to multiply each number by to get the next value. In our example, we want to multiply each number by 3. Click “OK”.

The growth series is filled in the selected cells, each subsequent number being three times the previous number.

Fill a Series Using Built-in Items

So far, we’ve covered how to fill a series of numbers, both linear and growth. You can also fill series with items such as dates, days of the week, weekdays, months, or years using the fill handle. Excel has several built-in series that it can automatically fill.

The following image shows some of the series that are built in to Excel, extended across the rows. The items in bold and red are the initial values we entered and the rest of the items in each row are the extended series values. These built-in series can be filled using the fill handle, as we previously described for linear and growth series. Simply enter the initial values and select them. Then, drag the fill handle over the desired cells you want to fill.

Fill a Series of Dates Using the Fill Command

When filling a series of dates, you can use the Fill command on the ribbon to specify the increment to use. Enter the first date in your series in a cell and select that cell and the cells you want to fill. In the Editing section of the Home tab, click “Fill” and then select “Series”.

On the Series dialog box, the Series in option is automatically selected to match the set of cells you selected. The Type is also automatically set to Date. To specify the increment to use when filling the series, select the Date unit (Day, Weekday, Month, or Year). Specify the Step value. We want to fill the series with every weekday date, so we enter 1 as the Step value. Click “OK”.

The series is populated with dates that are only weekdays.

Fill a Series Using Custom Items

You can also fill a series with your own custom items. Say your company has offices in six different cities and you use those city names often in your Excel worksheets. You can add that list of cities as a custom list that will allow you to use the fill handle to fill the series once you enter the first item. To create a custom list, click the “File” tab.

On the backstage screen, click “Options” in the list of items on the left.

Click “Advanced” in the list of items on the left side of the Excel Options dialog box.

In the right panel, scroll down to the General section and click the “Edit Custom Lists” button.

Once you’re on the Custom Lists dialog box, there are two ways to fill a series of custom items. You can base the series on a new list of items you create directly on the Custom Lists dialog box, or on an existing list already on a worksheet in your current workbook. We will show you both methods.

Method One: Fill a Custom Series Based on a New List of Items

On the Custom Lists dialog box, make sure NEW LIST is selected in the Custom lists box. Click in the “List entries” box and enter the items in your custom lists, one item to a line. Be sure to enter the items in the order you want them filled into cells. Then, click “Add”.

The custom list is added to the Custom lists box, where you can select it so you can edit it by adding or removing items from the List entries box and clicking “Add” again, or you can delete the list by clicking “Delete”. Click “OK”.

Click “OK” on the Excel Options dialog box.

Now, you can type the first item in your custom list, select the cell containing the item and drag the fill handle over the cells you want to fill with the list. Your custom list is automatically filled into the cells.

Method Two: Fill a Custom Series Based on an Existing List of Items

Maybe you store your custom list on a separate worksheet in your workbook. You can import your list from the worksheet into the Custom Lists dialog box. To create a custom list based on an existing list on a worksheet, open the Custom Lists dialog box and make sure NEW LIST is selected in the Custom lists box, just like in the first method. However, for this method, click the cell range button to the right of the “Import list from cells” box.

Select the tab for the worksheet that contains your custom list at the bottom of the Excel window. Then, select the cells containing the items in your list. The name of the worksheet and the cell range are automatically entered into the Custom Lists edit box. Click the cell range button again to return to the full dialog box.

Now, click “Import”.

The custom list is added to the Custom lists box and you can select it and edit the list in the List entries box, if you want. Click “OK”. You can fill cells with your custom list using the fill handle, just like you did with the first method above.

The fill handle in Excel is a very useful feature if you create large worksheets that contain a lot of sequential data. You can save yourself a lot of time and tedium. Happy Filling!